LabCert is a highly efficacious disinfectant for use on all dental surfaces. Can also be used on dental impression materials, such as silicones, alginates, polyether and plaster.
Helps protect clinical staff from cross-infection risks like Hepatitis B and C, HIV, Norovirus and Influenza B. Also deactivates prions. Biocidal against Pseudomonas Aeruginosa, E.Coli, MRSA, C.Difficile and Legionella.
In a recent study (Oct ’17) of 180 samples analysed at one of the UK’s foremost dental labs, LabCert achieved a 5 log reduction within 30 seconds. As most other cleaners recommend a 10 minute contact time, that represents a significant saving of valuable staff time and resources.
Non-irritant for skin, eyes and inhalation. No special handling procedures needed. pH neutral. Alcohol and aldehyde free. Biodegradable. Can be disposed of down drain with no danger to environment and aquatic life.
Directions for use:
Trigger (1L) – Spray with LabCert until coated and leave to dry for 30 seconds. If visible foreign matter is present on surfaces, remove it by pre-washing with a mild detergent and a soft brush or cloth, then use LabCert as a final stage disinfectant.
Cold sterilisation/soak (5L) – pour LabCert into non-metallic container and leave to soak for 30 seconds. If foreign debris is present on surfaces, remove it by pre-washing with a mild detergent and removing with a soft brush or cloth, then use LabCert as a final stage disinfectant.
Bactericidal, Virucidal, Fungicidal & Sporicidal.
Meets the efficacy standards of: BSEN 1040, 1276, 1650, 1656, 13624, 13697, 13704, 13727, 14204, 14348, 14463, 14476, 14561 & 14562.
BPR (Article 95) compliant.
Contains <1% hypochlorous acid in a buffered solution.